Steel tower angle cutting and slotting machine

Hydraulic Angle Notching Machine Model QJ140, QJ160, QJ200Applicable industry:Used for cutting corner of angles and also used for punching & marking by installing of mould.1. The machine with opening C-type structure, its cutting mould is rectangular double-blade mode. Multi-directions rotational corner cuttin

Featured Products

Hydraulic Angle Notching Machine Model QJ140, QJ160, QJ200
Applicable industry:
Used for cutting corner of angles and also used for punching & marking by installing of mould.

1. The machine with opening C-type structure, its cutting mould is rectangular double-blade mode. Multi-directions rotational corner cutting mould can cut out different angle of angles only need to adjust rotation die-carrier so as not to rotate the angles, so corner cutting with little error only need small working area.
2. The machine can be installed marking & punching system by customers' request, that is, only need to exchange moulds so as to carry out marking or punching of angles.
3. The machine with light adjuster makes corner cutting of angles accurately and easy to use it.

Main parameters:  
ModelQJ140QJ160QJ200(Four column)
FunctionsUsed for cutting corner of angles in steel tower industry
Nominal pressure(kN)80010001600
Stroke of oil cylinder(mm)505050
Times of stroke(min-1)20~2520~2520~25
Power of motor(kW)151522
Throat depth(mm) 325325Column without throat
Scope of angles(mm)L40×40×3~
L140×140×12
L40×40×3~
L160×160×16
L40×40×3~
L200×200×20
Rotary angles of corner cutting mould360° manual
Overall dimensions of corner cutting mould(mm)650×650×500700×700×500830×700×600
Overall dimensions L×W×H(mm)1270×1020×18001300×1020×18801370×1120×1900

Angle Cutting Notching Machine for Steel Tower
Angle Cutting Notching Machine for Steel TowerAngle Cutting Notching Machine for Steel Tower
 

Contact us

Please feel free to give your inquiry in the form below We will reply you in 24 hours